WolfNCU version 4.1f- Alternative menu for devices with WindowsCE: WolfNCU is a program that does not change the basic interface of your device but just adds it. Allows the use of different WindowsCE software including navigation programs. You can have one, two or more navigation programs and use them if necessary, but only for one, that is default, WolfNCU disables / excludes, disconnect / GPS receiver, to use it from navigation! Modelirovanie obuvi programma. WolfNCU gives you information on the speed, direction, altitude and in the 4th version is a built-in mp3 player.
Page 1 of 3 - Replacing GPS software on DVD WINCE 6.0 - posted in Accessories: Hi, Anyone would be able to advice on how to replace the.
Currently, this is ready and tested compilation for device with name of internal memory SDMMC, GpsPort=COM7, GpsSpeed=57600, ARM processor and screen resolution 800x480. Installation method: 1. If the specifications on your device ( SDMMC, GpsPort, GpsSpeed, processor and screen resolution) match the above, must be copy the entire contents of a folder 'This folder is SDMMC' in the root directory of your device. Of your device set the path: SDMMC WolfNCU WolfNCU.exe.
3d max gotovie raboti 10. It was a complete surprise to me when I discovered an article about me featured on The post was written by Roxanne Fequiere, a writer and contributing editor for and to name a few. Reading the article made me smile because she obviously did her homework, and got all her facts straight.
Put your navigation software into a folder 'MobileNavigator' as the executable file rename to do so 'mobilenavigator.exe' 4. In the folders Image, MP3 and Video you can copy media files, as for their auditioning viewing, use built-in players (programs) Everything (name of internal memory (SDMMC) GpsPort, GpsSpeed) except model of processor and screen resolution can be changed according to your device in the files with extension.ini, situated in the folder WolfNCU! For the different processors are needed different files.dll (libraries) which you can acquire, if use the file wolfplus_v4.1f.exe to install the required version of the program.
Installation method using installer wolfplus_v4.1f.exe: 1. Start the EXE file and choose a language - The default is English 2. Set the path to the memory, where you will install 3. Choose 'Full installation' and the type of your processor - This step is important because EXE copies the different.dll files for the different processors: a) ARM b) MIPS CPU c) PC / intel / amd / cpu 4. Set the path to the appropriate programs - if any. If the programs are added later, the paths are done by.ini and can also be from the menu of the already installed WolfNCU.
Uncheck the option 'Whether to replace the file' 6. Running the installation and Finish 7. After Finish must be copy the folder Skin from: This folder is SDMMC WolfNCU Skin and replace the existing one, because it is empty!
After finishing, you must change all values in.ini and set yours! By default, they are GpsPort=COM2 and GpsSpeed=9600 There are skins for other resolutions, except for 1024x600 and if necessary, I will post them. How to get into Windows CE mode. Create a text file with name YFGo2CE.bld. The file's contents can be anything but must be at least 1 byte. Alternatively you can download it this post.
This post requires you to click the 'LIKE this post' button and hit F5 to read this content. Copy the file YFGo2CE.bld in the root directory of the SD card 3. Power off ( not sleep) the GPS, then switch it back on. If this method does not work for you and you are not using the original 2GB SD card that came with the GPS, try again using the original SD card. Other users have reported that this does not work on some SDHC cards.
PicoMODA9 State Production CPU CPU NXP i.MX 6 Core ARM Cortex-A9 No of Cores Solo/DualLite Frequency max. 1.2GHz L2-Cache max. 1 MB GPU 2D 600Mpix/s Video Decode 1080p60 Operating System Linux Buildroot Yocto Windows WCE 6.0 WEC 7 WEC 2013 Memory Flash max. 4GB Interfaces SD-Card 1x extern/on-board Ethernet max. 10/100Mb USB Host 1-2x USB Device 1x CAN 1x UART 4x I2C 1x SPI 1x (Software only) Audio Line In/Out/Mic Digital I/O max. 64 Touch Panel 4-wire, analog resistive; PCAP Touch via I2C Camera analog/digital 0/1 Display RGB 18bit LVDS 18bit/24bit CRT/DVI 0/DVI Common Supply Voltage +3.3VDC/+-5% Operating Temperature 0°C - +85°C opt.
-25°C - +85°C opt. -40°C - +85°C Size 80x50x10mm (lxbxd) Weight ~20g Long Term Availability 2027. State Production Production Production Production CPU CPU NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 NXP i.MX 6 Core ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 ARM Cortex-A9 No of Cores Solo Solo DualLite DualLite Frequency 1GHz 1GHz 1GHz 1GHz L2-Cache 512KB 512KB 512KB 512KB GPU 2D 600Mpix/s 2D 600Mpix/s 2D 600Mpix/s 2D 600Mpix/s Video Decode 10p30 10p30 Operating System Linux Buildroot Yocto Buildroot Yocto Windows WEC 7 WEC 7 Memory Flash 256MB 256MB 256MB 256MB RAM 512MB 512MB 512MB 512MB Interfaces SD-Card 1x extern/on-board 1x extern/on-board 1x extern/on-board 1x extern/on-board Ethernet max. 10/100Mb max. 10/100Mb max. 10/100Mb max.